Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Low Nox Gas Furnace 080 MBH 16 SEER2 V2

Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Low Nox Gas Furnace 080 MBH 16 SEER2 V2
Kit Includes PVC Ptrap Kit, Drain Pan Float Switch, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Whip, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, 30x60 Goliath Drain Pan, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Low Nox Gas Furnace 080 MBH 16 SEER2 V2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
080 MBH Heat
Includes:
H4A7T24AKAWA, F96VTN0802120A, EHD4X24AAL, ACGKIT2H
Nominal Capacity (BTUH):
24000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
16
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Horizontal Slab
Furnace Efficiency:
96
System Nominal Tons:
2.0 Ton
AHRI System Number:
210694975
A/C, Single Phase, Split Gas Furnace Multi Stage, Horizontal Slab H4A7T/F96VTN/EHD4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Gas Furnace

  • Two-stage heating operation
  • Two-speed induced draft combustion blower
  • Supports single- and two-stage cooling units
  • Dehumidification feature (A/C)
  • Fully insulated steel cabinet
  • Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
  • VCT Variable Speed Constant Torque Motor
  • Aluminized steel RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35” (889mm) high , for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self-configuring and communicating control
  • Concentric vent available
  • Twining Capable (select size) w/ kit
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Horizontal bi-directional airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 2 - 5 tons
  • Cased horizontal slab coil design for bi-directional airflow
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup